Hot tubs and garden heaters are sometimes supplied with a European plug. The CEE 7/7 two pin plug is used across Europe and parts of Scandinavia as it fits both the German Schuko (side earth contacts) and French (earth pin) type of sockets.
To prevent voiding the warranty by cutting off and replacing with a UK 13A plug, our adaptor provides an alternative solution. We have previously sold a significant number of these adaptors to charge electric vehicles and to industry, due to their ability to Standard travel adaptors must not be used with hot tubs, as they only suitable for low current applications.
As the hot tub/heater will be connected via a UK 13A plug, it is important to check that the total rating of the unit does not exceed 2,900w. European appliances can use up to 3,600w as European sockets are rated at 16A - this will overload a UK socket.
- Tough UK 13A plug.
- Schuko IP44 rated socket (protected against low pressure water sprays).
- 0.4mm of 1.5mmsq industrial specification H07RN-F rubber cable, specifically manufactured for harsh environments with high mechanical, chemical, water and UV resistance. Flexibility and performance is retained over a wide temperate range (-25 to 55°C). Find out what’s so special about this cable.
- PAT tested.
If you require an adaptor with a different socket, please do get in touch, as we can make adaptors for almost any international socket, many from stock.